Emlid Troubleshooting Guide | Blank Status Screen / No FIX with Emlid RS2 or RS3 as a Network Rover

< All videos

This video will walk through a troubleshooting process that will check the most common issues that arise when you are unable to get a fix solution with your RS2/RS2+/RS3 network rover communicating over bluetooth.

A blank Status can appear when your receiver is paired in the Bluetooth settings of your data collection device. Open your Bluetooth Settings and tap on the information icon next to your connected receiver. Click Forget This Device. In Emlid Flow you should still see your Bluetooth connection. If you cannot see the connection and you are using an Android device, you will have to activate BLE. Now our Status screen has populated but we don’t have any corrections coming in. Since we are using the Bluetooth connection we will need to change our correction input to NTRIP over Bluetooth. Go into your device Wi-Fi settings and make sure that the receiver’s hotspot is not showing up as a known network. If it is, click Forget This Network. Check back in Emlid Flow, you should be receiving corrections.