How To: Activate a SIM card on the Reach RS2+

Before you can activate mobile data, the SIM card must be installed in the RS2+.

  1. Connect to the RS2+ over Wi-Fi. 
  2. Open Emlid Flow, go to Settings, then Mobile data.
  3. Activate Data Roaming.
  4. Go to APN settings and enter your APN if applicable.  Enter “Super” for the E38Connect SIM Card.
  5. Turn mobile data on.
  6. Underneath ‘Mobile Data’, the phrase “Connected to the Internet” will appear. (Make sure the Mobile data slider is set to ON).