How To: Connect the Mavic 3 Enterprise RTK to the Reach RS2 Base Station

Before you begin, using the Emlid Flow app, set the RS2 correction output to Local NTRIP. 

  1. Power up the Mavic 3 and go to Flight Controller Settings.
  2. Open the RTK tab, enter the local NTRIP credentials specified in Emlid Flow.  
  3. Return to the main screen and swipe down to show the connection options. 
  4. Connect to the ReachBase hotspot.
  5. Verify you have an RTK FIX.

The RTK corrections will now be sent directly over Wi-Fi from the Reach RS2 to the Mavic 3 Enterprise controller.