Remote ID Transpnder
Remote ID Transponder Size
  • Load image into Gallery viewer, Remote ID Transpnder
  • Load image into Gallery viewer, Remote ID Transponder Size

DroneScout DroneBeacon Db120 RemoteID Broadcast Module With Battery

Regular price
Sale price
Regular price
Sold out
Unit price
Shipping calculated at checkout.

The DroneBeacon db120 is a small, but powerful (direct/broadcast) Remote ID transponder.

The transponder has both a battery and GNSS receiver.

It can be mounted on a drone using the provided 3M dual-lock stickers.

The DroneBeacon db120 is a so-called direct or broadcast Remote ID long-range transponder, equipped with its own GPS and battery. A transponder is also called add-on, tracker, tag or (wireless) number plate.  The DroneBeacon can be attached to any (consumer) drone using the 3M dual-lock tape.  It is compliant with the (upcoming) standards in the EU and USA. The FAA has approved the db120 for usage in the USA. Furthermore, the transponder is optimized for long range due to its transmit power and antenna design. It also supports all transmission protocols for maximum flexibility. 

DroneBeacon can be attached to a drone by using the included M3 dual-lock stickers or use the M5 screw noses. Fully charged, the transponder allows a battery live over 3 hours. There are 4 battery LEDs to show the current battery level. The transponder can be configured easy using any device, by pressing the configuration button and connect to the dronebeacon Access Point.

Users need to register their drone at the FAA website:

Specifications Db120

FAA approval


Short-range radio

Bluetooth and WiFi 2.4GHz, output power (ERP): + 20 dBm (100 mW)


GPS, GLONASS, 2.5m positioning precision


0 dBi antenna (internal omni-directional high-performance PCB antenna)


LiPo 3.7V 600 mAh, battery life > 3 hours

charging, 5V USB-C, 1 hour from a discharged state

LED lights

charging, battery level (4x), configuration mode


plastic (nylon)

Fastening mechanism

3M dual-lock or M5 screws using the screw noses

IP rating


Operating temperature

-5°C to +40°C


48 x 38 x 28 mm. With screw nodes the dimensions are 48 x 51 x 28 mm


25 grams