From 3 to 5 Days to Hours: What Drones Changed on Six Survey Projects
Six drone surveying projects from DJI's 2026 Enterprise Case Study Collection, from a vegetated creek to glaciers and ski slopes, plus the questions we'd ask before copying them.
A vegetated creek is a hard place to survey. A crew with a total station or a terrestrial scanner can spend three to five days on it, and still miss ground detail wherever trees and brush block the line of sight. Adams Surveying, a U.S. firm, now flies the job with a drone carrying DJI's Zenmuse L2 LiDAR sensor. It finishes in hours.
That creek job comes from DJI's 2026 Enterprise Case Study Collection. Below is what each team did, plus what we'd ask before copying them.
Creek surveys: LiDAR sees the ground under the brush
The L2 captures 1.2 million points per second from above the canopy. The pulses reach the ground through trees and underbrush, so the point cloud shows the real grade breaks along channels and banks, and it defines the drainage areas. Adams gets colorized point clouds and 3D models of the creek, which help with project planning and water management.
Cliffs: finding cracks that plants hide
The Jurassic sea cliffs in Asturias, Spain, keep moving. Cracks near the Faro de Tazones forced evacuations, and the slide covers tens of thousands of square meters. Vegetation has grown over the cracks, so field walks and standard photogrammetry couldn't find them reliably.
The team built a 4D terrain model (3D plus time) from drone flights and total stations, plus drilling and geomechanical analysis. To get through the vegetation, it added a DJI Matrice 400 with the DJI L3 LiDAR, with two 100-megapixel cameras to color the point clouds. The bare-earth data exposed cracks and scarps, and the team cross-checked it against traditional aerial survey results.
LiDAR slotted into a multi-source approach. It didn't replace the rest of the toolkit.
Ports: one workflow from capture to deliverable
Bars Port in Vietnam needs current data on its yards and facilities to plan production. Traditional surveys were slow, labor-intensive work with safety risks. With its partner PC Coast, the port set up a DJI workflow:
- Matrice 350 RTK: Carrying Zenmuse P1 and L2 sensors for mapping.
- Mavic 3E: Close-range facility inspections.
- DJI Terra: Processes the captured data.
- DJI Modify: Produces the final deliverables.
The port reports faster capture and delivery, better accuracy from RTK and LiDAR, and less exposure to high-risk areas and climbing inspections. Look at what's on that list: aircraft and sensors, but also the software. DJI says faster software processing is part of what shortens the cycle from capture to delivery.
Glaciers: surveying where you shouldn't send people
Lake Palcacocha sits at 4,500 m in the Peruvian Andes. The glacier above it is retreating, which raises the risk of ice avalanches and outburst floods. Monitoring on foot is dangerous in that weather and terrain, and the work needs frequent, high-accuracy observations.
The team uses a DJI Dock 3 with Matrice drones to fly fully automated missions that track glacier displacement and ice-block movement, and to watch cracks develop. Everything from planning to cloud processing happens remotely through DJI FlightHub 2. Nobody has to go onto the ice. The output is terrain models and displacement maps that local authorities and researchers use for early-warning assessments.
Slopes: a daily check from the air
At Nozawa Onsen, a ski resort in Japan, staff used to inspect the slopes before opening by eye and by radio. Snow cracks and avalanche hazards were hard to spot, hard to share, and hard to respond to quickly. The cold mountain conditions also demand reliable equipment.
The resort ran a pilot with a DJI Dock 3 and a Matrice 4D, managed through DJI FlightHub 2. Teams plan missions in a web browser and review the results in 3D with shared annotations. The drones:
- Inspect slopes and assess crack location and scale
- Check closed high-risk areas remotely
- Cover the corridors around gondolas and ropeways
A loudspeaker was tested too, to warn people away from restricted zones.
Daily imagery is archived, so teams can compare conditions over time. Staff spend less time in dangerous areas, and the 3D annotations make it easier for different teams to review the same site. It's a pilot, so the results are early. But the idea of flying the same site on a schedule applies to any job you monitor over time.
Data control: keeping survey data on your own network
Survey drones often work around critical infrastructure and sensitive data. Cloud drone platforms can route that data through overseas servers, which makes it hard to meet customer rules on data localization, network isolation and compliance.
In Australia, Sensorem Drones brought DJI FlightHub 2 onto the customer's own network. During missions, drone data goes straight to a local appliance for live monitoring, storage and analysis, without passing through the cloud. The system also connects to the customer's existing business systems through APIs, so task scheduling and asset records stay linked. The customer gets full control of mission data, and the system keeps working even where connectivity is poor.
What we'd ask before buying
DJI's collection is a vendor's own set of case studies, so treat it with that caveat in mind: only the creek project gives a time comparison, and the rest report results in general terms. So here are the three questions we'd ask on your own jobs.
Is the ground hidden?
The two projects where LiDAR made the clearest difference were both covered in vegetation: the creek and the cliffs. If your sites are open ground, the collection gives no reason to expect the same gain.
How will you check it?
On your first few projects, measure RTK checkpoints on the ground and compare them with the LiDAR surface before the data goes into a deliverable.
Where will the data live?
If your clients have rules about where their data can be stored, find out how the platform handles it before you buy.
Talk to E38
If you're weighing drone LiDAR for vegetated sites, or RTK ground control to back up your drone work, our team can help match equipment to your projects.
Email sales | +1 (440) 596-4076 | E38SurveySolutions.com
Sources
All case details come from the DJI Enterprise Case Study Collection, 2026.2, Land Surveying section, rewritten in our words. Videos are the supporting links listed in the collection.